Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FINCTIONAL TOLERANCE (LINEARITY) OF THE OUTPUT IS EQUAL TO OR LESS THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSTIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE REHOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 73138 | BI TECHNOLOGIES CORPORATION |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AEDX | SHAFT STYLE | ROUND |
| AEFL | MAXIMUM RUNNING TORQUE | 1.00 INCH-OUNCES |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION |
| AEFK | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.007 INCHES |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 MINIMUM |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25/+0.25 SINGLE SECTION |
| AEFP | NONTURN DEVICE RADIUS | 0.562 INCHES NOMINAL |
| AEFN | NONTURN DEVICE LOCATION | AT 6 OCLOCK |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 65.0 SINGLE SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| ABXF | SHAFT LENGTH | 0.875 INCHES NOMINAL |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| AEGC | SHAFT RADIAL PLAY | 0.004 INCHES |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AEGB | PILOT DIAMETER RUNOUT | 0.0025 INCHES |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -150.0/+300.0 SINGLE SECTION |
| APXH | TERMINAL LOCATION | REAR END |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 2500.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ADAQ | BODY LENGTH | 0.734 INCHES NOMINAL |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| AEFZ | SHAFT RUNOUT | 0.0025 INCHES |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| ADAP | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL |
| AEGA | LATERAL RUNOUT | 0.003 INCHES |
| ABPM | BODY DIAMETER | 1.312 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TAB, SOLDER LUG |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -1.0/+1.0 OHMS SINGLE SECTION |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |